Bernette b48 FUNLOCK Instruction Manual page 66

1
• Inside Corner
– Cut inside corner up to seam line
– Sew along seam line.
– Sew up to end of fold. (Leave needle in fabric)
PLEASE NOTE:
Presser foot has been removed to show detail.
– Raise presser foot. (Leave needle in fabric)
– Spread fold and re-fold so that seam line is
straight
– Turn the fabric and lower the presser foot so
that the upper knife is positioned in line with the
1
cut edge.
– Pull slack threads up, then start to sew.
Sewing over pins will damage and /or destroy
the cutting edge of the knives.
• Pin Placement
– Insert pins to the left of the presser foot. The
pins will be easy to remove and are away from
the cutting action of the knives.
• Securing The Thread Chain
– Thread a large eye, hand sewing needle (such
as a tapestry needle) with the thread chain.
– Pull the thread chain into the overlock stitches
or between two layers of fabric.
CAUTION:
(1) as shown.
65