Bernette b48 FUNLOCK Instruction Manual page 6

IMPORTANT
Precautions should always be followed,
including the following:
Read all the instructions before using this
machine.
In general when the machine is not in
use, it should be disconnected from
the electricity supply.
DANGER!
As a protection against electrical shock:
1. The machine should never be left
unattended when plugged in.
2. Always unplug this machine from
the electrical outlet after using and
before cleaning.
3. LED Radiation. Do not view directly
with optical instruments. Class 1M
LED product.
WARNING!
As a protection against burns, fire, electric
shock or injury to persons:
1. Use this machine only for purposes
as described in this manual. Use
only attachments, accessories and
parts recommended
manufacturer.
2. Do not allow this machine to be
used as a toy. Close attention is
necessary when this machine is
used by or near children. The
machine is not intended for use by
persons (and children) with reduced
physical, sensory
capabilities or lack of experience
and knowledge. Unless they have
been given supervision or instruction
concerning use of the machine by a
person responsible for their safety.
To ensure children do not play with
Never operate this machine if:
3. Return the machine to your local
4. Never operate the machine with any
5. Keep fingers away from all moving
6. Never insert any objects into any
7. Do not use the machine outdoors.
8. Do not operate the machine where
9. Do not pull or push the fabric while
by the
10. Switch the machine off «0» when
11. Always unplug the machine from the
or mental
12. Do not use bent needles.
the machine they
supervised.
the cord or the plug are damaged,
⦁
it is not working properly,
⦁
it has been dropped or damaged,
⦁
it has fallen into water.
⦁
authorized BERNINA dealer for
examination or repair.
air openings
ventilation openings of the machine
free from the accumulation of lint,
dust and loose cloth.
parts. Special care is required
around the sewing needle and the
knife.
openings on the machine.
aerosol products (sprays) or oxygen
are being used.
stitching. This can result in needle
breakage.
making any adjustments in the
needle area, such as threading the
needle, changing
threading the looper, or changing
the presser foot.
electrical outlet when removing
covers, when covers are opened to
raise the knife or thread the loopers,
when lubricating or when making
any other user servicing adjustments
mentioned in the instruction manual.
must be
blocked. Keep
the needle,
5