ShoreTel Brilliantly simple Manual page 21

Communicator for Mobile
1
Options include:
Setting the Polling Rate

Enabling/disabling GPS Services

Enabling/disabling Bluetooth Services

Enabling/disabling Connect Device(for Bluetooth only)

There are separate icons for GPS and Bluetooth services. When these services are enabled, one or
both of these icons appear on the top right hand corner of the ShoreTel Communicator for Mobile Main
Menu page. These icons indicate activity and Bluetooth and GPS reception.
Note
This feature is not supported on RazrV3xx, Windows Mobile, and BlackBerry 8100 devices.
Setting the Polling Rate
The polling rate specifies the conditions under which the device searches for a GPS or Bluetooth
signal. The polling rate must be configured before LBS is enabled.
Two polling conditions are defined as:
On Use. The default setting. This setting has the smallest impact on device battery life. An On Use

interrupt is an event that enables ShoreTel Communicator for Mobile as the foreground
application, either when you access any ShoreTel Communicator for Mobile function or move
ShoreTel Communicator for Mobile to the foreground. In this case, ShoreTel Communicator for
Mobile polls for location routing coordinates after the event.
Periodic Intervals. You can configure ShoreTel Communicator for Mobile to poll once every 5,15,

30, or 60 minutes. This option can significantly affect the battery life of your device.
Setting or changing the polling rate
1. Launch the ShoreTel Communicator for Mobile application and navigate to the Main Menu.
2. Select Settings. The Settings page appears.
3. Select Location Routing. The Location Routing page appears.
4. Highlight Polling Rate and click the appropriate key on your device to display the drop-down
menu.
5. Select the rate that you want the device to scan for a GPS or Bluetooth signal.
6. Press the Return key on your device or navigate to the next page to save the configuration.
ShoreTel 14.2
Configuring Settings
21