Disposal And Recycling - Mira Go Thermostatic Power Shower Installation And User Manual

22. DO NOT perform any unspecified modifications, or drill or cut holes
in the product other than instructed by this guide. When servicing
only use genuine Kohler Mira replacement parts.
23. Always check the water temperature is safe before entering the
shower.
24. The water supplies to this product must be isolated if the product is
not to be used for a long period of time. If the product or pipework
is at risk of freezing during this period they should also be drained
of water.
25. If the shower is dismantled during installation or servicing then,
upon completion, an inspection must be made to ensure all
electrical connections are tight and that there are no leaks.
26. This appliance is intended to be permanently connected to the
water mains and not connected by a hose set.
27. Maximum Inlet Static Pressure is 100 kPa (1.0 bar).
Minimum Inlet Static Pressure is 0.8 kPa (0.008 bar).

DISPOSAL AND RECYCLING

End of Product Life
Electrical and electronic devices contain a range of materials that can
be separated for recycling and used in new products.
This product should not be disposed of with your general
household waste. When this product has reached the end
of its serviceable life, please take it to a recognised WEEE
(Waste Electrical and Electronic Equipment) collection
facility such as your local civic amenity site for recycling.
Your local authority or retailer will be able to advise you of your nearest
recycling facility.
1079321-W2-G 4