Canon imagePROGRAF GP-4000 Online Manual page 549

• The display of the settings screen may differ depending on the application software you are using.
Deleting Print Job
Use Stop button from printer to cancel the print job.
Restrictions on the AirPrint
• If A2+, A3+, or 13 x 22 is selected for Paper Size in the print dialog, part of the image may not fit on
the paper.
• If printing cut paper, the bottom edge of the image may be cut out.
• To perform borderless printing, configure settings in paper sizes. Depending on the type of paper,
print results might have slight margins on the left and right edges.
• If printing cut paper, feed the paper vertically. If the paper is fed horizontally, it will still print vertical
images.
• When printing images with large data sizes, the color may turn out uneven. In this case, select Printer
settings -> Hard disk settings -> Save first and print -> ON on the operational panel of the printer.
• Some paper sizes that are compatible with the Canon IJ printer driver are not compatible with AirPrint.
If using these sizes, set a custom size.
• Canon imagePROGRAF Free Layout and Canon imagePROGRAF Preview cannot be used.
Caution when Setting the Print Quality
If you are using the Canon IJ printer driver or AirPrint, the print quality settings may differ depending on
the type of paper you are printing. Excluding some types of paper, Standard for Canon IJ printer driver
corresponds to Draft in AirPrint, and High in Canon IJ printer driver corresponds to Standard in AirPrint.
549