Paper Is Not Cut - Canon imagePROGRAF GP-4000 Online Manual

Paper is not cut

Is Automatic Cutting in the printer driver set to No or Print Cut Guideline?
Check 1
Set the printer driver Automatic Cutting setting to Yes.
Page Setup Tab Description (Windows)
Quality & Media (macOS)
Is Cutting mode in the touch screen menu set to Eject cut or User cut?
Check 2
If Cutting mode is set to Eject cut, select Feed/cut in the touch screen menu and cut the paper.
If Cutting mode is set to User cut, cut the roll paper with a cutting implement such as scissors.
Specifying the Cutting Method for Rolls
Is the cutter blade attached?
Check 3
Attach the cutter blade.
Replacing the Cutter Blade
Is the cutting method for paper ejected after printing set to Do not cut when
Check 4
the roll unit is set to Take-up mode?
Follow the steps below to change the settings.
1. 1. Select the roll unit on the touch screen.
2. Select Use in take-up mode, and then select Use the cutting mode setting.
2.
3. Set the Cutting mode for Roll paper 1 on the touch screen to Automatic cut.
3.
682