5.
5. If paper dust has accumulated in vacuum holes (A) on platen or in ink grooves (B), use
cleaning brush (C), provided with printer, to wipe it away.
Important
•
• Do not touch the linear scale (D), carriage shaft (E), or ink tube stabilizer (F). Touching these may
cause malfunction.
Note
• If the cleaning brush is dirty, rinse it in water.
6.
6. Using a damp cloth that you have wrung out completely, wipe inside the top cover to clean
it.
Wipe away any ink residue and paper dust (debris from cutting) on top cover roller (G), paper retainer
(H), entire platen (I), ink grooves (J, K, L) and its surroundings, output guide (M), and so on.
414