Canon imagePROGRAF GP-4000 Online Manual page 480

• If the roll papers loaded in the upper and lower levels are different media types, the document is
printed on the roll paper that matches the media type specified in the print job.
If the document is being rotated 90 degrees for printing and the roll papers loaded in the upper
and lower levels have different widths and different media types, set the correct combination of
width and media type so that they match one of the roll papers loaded in the printer.
9. 9. Complete the setup
Click Print.
When you print, the paper source is switched automatically to roll paper.
Important
• On the operation panel, if Printer settings -> Paper-related settings -> Roll paper auto switching is
set to Do not identify size, the document may be printed on the unintended roll paper. Before printing,
confirm that the setting in the operation panel is set to Identify size.
• 2-level roll switching is not possible when the paper rolls being fed on the platen are not compatible with
automatic cut-off. For checking which types of paper are compatible with automatic cut-off, look up the
paper you want to use on the "Paper Information List."
Note
• For details about how to switch the source levels depending on the print job, see
Rolls."
480
"How to Switch Paper