Panel Table Page; Source Reentry Lists Page - Sony MKS-R3210 Operating Instructions Manual

• User Manual: Displays the Operating Instructions (PDF).
• About Web Menu: Displays information relating to the web
menu.
Note
When communication between the browser and remote
control panel is disconnected, an error dialog appears. Also,
communication between the browser and remote control
panel is disconnected when
of the web menu screen. Reconnect from the browser.

Panel Table Page

Use to assign functions to pinned buttons and to assign
connectors or functions to selection buttons.
Setting pinned buttons
1
Select the [Pinned Button] radio button.
2
Click the pinned button you want to set in the panel
diagram. Alternatively, double-click a row in the list,
or select the row and click the [Edit] button.
3
Select the function to assign to the button in the
dialog.
No Assign: Select to assign no function to the pinned
button.
Monitor: Set the Monitor function. Also, set the
destination number to monitor.
Status: Set the Status function.
Protect: Set the Protect function.
Lock (Chop): Set the Lock (Chop) function.
Assign: Set the Assign function.
Source, Destination/Level: Set the Source,
Destination/Level function.
Entry: Set the Entry function.
Take: Set the Take function (MKS-R1620/R1630 only).
Shift: Set the Shift function (MKS-R1620/R1630 only).
Page Up/Group Up: Set the Page Up/Group Up function
(MKS-R1620/R1630 only).
Page Down/Group Down: Set the Page Down/Group
Down function (MKS-R1620/R1630 only).
Group Up: Set the Group Up function
(MKS-R1620/R1630 only).
Group Down: Set the Group Down function
(MKS-R1620/R1630 only).
Group Jump: Set the Group Jump function
(MKS-R1620/R1630 only). Also, set the page group
number to display and the name to display on a
button when the button is pressed.
For details about Page Up/Group Up and Page
Down/Group Down, see "Pages and Page Groups"
(page 22).
4
Click the [Apply] button.
5
Repeat steps 2 to 4 until finished the configuration.
6
Click the [Save] button.
Setting selection buttons
1
Select the [Select Button] radio button.
is displayed at the top right
2
On the MKS-R1620/R1630, select the page number
you want to set, and specify a page name as
required.
3
Click the selection button you want to set in the
panel diagram. Alternatively, double-click a row in
the list or select the row and click the [Edit] button.
4
Set the function to assign to the button in the dialog.
No Assign: Select to assign no function to the button.
Xpt: Set the source number to assign to a source and the
destination number to assign to a destination. You
can set either or both. When [Color Settings] is set to
[Button] on the "Display Settings Page" (page 29),
you can set separate colors for sources and
destinations.
Level: Set the Level function. Also, set the level to enable
and the name to display on a button when the button
is pressed.
Monitor: Set the Monitor function. Also, set the
destination number to monitor.
Protect: Set the Protect function.
Lock (Chop): Set the Lock (Chop) function.
Source, Destination/Level: Set the Source,
Destination/Level function.
Entry: Set the Entry function.
Take: Set the Take function (MKS-R1620/R1630 only).
Shift: Set the Shift function (MKS-R1620/R1630 only).
Page Up/Group Up: Set the Page Up/Group Up function
(MKS-R1620/R1630 only).
Page Down/Group Down: Set the Page Down/Group
Down function (MKS-R1620/R1630 only).
Group Up: Set the Group Up function
(MKS-R1620/R1630 only).
Group Down: Set the Group Down function
(MKS-R1620/R1630 only).
Group Jump: Set the Group Jump function
(MKS-R1620/R1630 only). Also, set the page group
number to display and the name to display on a
button when the button is pressed.
5
Click the [Apply] button.
6
Repeat steps 3 to 5 until finished the configuration.
7
Click the [Save] button.

Source Reentry Lists Page

Use to associate the monitor target destination of the
destination monitor function with a source in the reentry table.
Configuring a reentry table allows you to execute the
destination monitor function when a source selection button
is pressed. You can specify up to 128 reentry tables.
Note
This setting is not required when [Destination Monitoring] is
configured in IP Live System Manager v2.3.0 and later.
1
Double-click an ID to set, or select the ID and click
the [Edit] button.
2
Enter a source number and destination number in
the dialog.
Source Port Number: Enter a source number to
associate with the monitor target destination.
26