Removing The Fork Protector; Installing The Fork Protector; Removing The Lower Triple Clamp - Husqvarna TE 150i 2022 Owner's Manual

12.7

Removing the fork protector

12.8

Installing the fork protector

12.9

Removing the lower triple clamp

SERVICE WORK ON THE CHASSIS 12
–
Remove screws
–
Remove screws
–
Remove screws
H03681-10
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
–
Position the fork protector on the right fork leg. Mount and
H03681-11 tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
Main work
–
Remove screw
–
Remove screw
–
Open cable holder
the clutch line.
–
Take off the upper triple clamp with the handlebar and set
aside.
Info
H03682-10
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
1
.
M6 10 Nm (7.4 lbf ft)
2
.
3
.
M6 10 Nm (7.4 lbf ft)
p. 56)
( p. 98)
( p. 57)
p. 63)
1
.
2
.
3
in front of the left radiator and detach
p. 112)
59