Husqvarna TE 150i 2022 Owner's Manual page 113

Guideline
(TE 150i EU)
Fuse 1 - 10 A - EFI control unit, lambda sensor, oil
pump, combination instrument, electronic fuel injection,
diagnostics connector, ignition coil, oil level sensor
Fuse 2 - 10 A - horn, brake light, radiator fan (optional),
turn signal
Fuse 3 ‑ 10 A ‑ high beam, low beam, position light, tail
light, license plate lamp
Fuse 4 - 5 A - fuel pump
(TE 150i US)
Fuse 1 - 10 A - EFI control unit, oil pump, combination
instrument, electronic fuel injection, diagnostics con-
nector, ignition coil, oil level sensor
Fuse 2 - 10 A - radiator fan (optional)
Fuse 3 - 10 A - low beam, position light, tail light
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical
system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumer.
–
Close the fuse box cover
Finishing work
–
Mount the seat. ( p. 68)
–
Install the air filter box cover. (
ELECTRICAL SYSTEM 15
A
.
p. 150)
p. 150)
1
.
p. 69)
111