17 Tuning The Engine; Checking The Play In The Throttle Cable; Adjusting The Play In The Throttle Cable - Husqvarna TE 150i 2022 Owner's Manual

17 TUNING THE ENGINE

17.1
17.2
124

Checking the play in the throttle cable

400192-11

Adjusting the play in the throttle cable

Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
S04499-10
–
Check the throttle grip for smooth operation.
–
Turn handlebar as far as possible to the right. Turn the
throttle grip back and forth slightly and determine the play in
A
throttle cable .
Play in throttle cable
» If the throttle cable play does not meet the specified
value:
–
Adjust the play in the throttle cable.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Adjust the play in the throttle cable.
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 68)
–
Remove the right side cover. (
–
Remove the fuel tank.
–
Check the throttle cable routing. (
Main work
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve .
–
2
Loosen nut .
–
3
Turn adjusting screw
–
4
Loosen nut .
–
5
Turn adjusting screw
–
3
Turn adjusting screw
cable at the throttle grip.
3 ... 5 mm (0.12 ... 0.2 in)
( p. 124)
( p. 124)
p. 69)
p. 73)
( p. 74)
p. 82)
in as far as possible.
in as far as possible.
so that there is play in the throttle