Husqvarna TE 150i 2022 Owner's Manual page 48

10 SERVICE SCHEDULE
Change the oil pump; clean the oil screen.
Clean the oil screen in the oil tank.
Clean the protection cap of the pressure sensor.
Change the coolant.
Perform minor engine service. (Check the exhaust control for functioning
and smooth operation. Check the clutch.)
Perform major engine service including removing and installing the
engine. (Change the connecting rod, conrod bearing, and crank
pin. Clean the hose connections of the pressure sensor. Check the
transmission and the shift mechanism. Change all engine bearings.)
○
One-time interval
●
Periodic interval
46
Every 10 operating hours when used for motorsports
( p. 122)
Every 40 operating hours when used for motorsports
every 12 months
Every 80 operating hours
Every 40 operating hours
After 20 operating hours
After 10 operating hours
every 48 months
●
●
● ● ● ●
●
● ● ● ●
● ●