Bluetooth Beacon
Tap BLE Beacon on the Setup screen to display the BLE Beacon screen.
BLE Beacon Screen
Use the BLE Beacon screen to configure the built-in PinPoint™ proximity detection beacon. Using
Bluetooth® technology, the beacon works with the Crestron App or Crestron PinPoint App to
determine when a mobile device is in or near the same room as the beacon, and signals the
mobile app to automatically display the appropriate controls and information for the room.
Tap On or Off underneath BLE Beacon to turn the proximity beacon on or off, respectively.
l
Tap On or Off underneath Config Mode to turn configuration mode on or off, respectively.
l
Turning on configuration mode enables the proximity beacon to be configured.
NOTE: The proximity beacon and configuration mode cannot both be turned on at the same
time.
Tap < BACK to return to the Setup screen.
Product Manual — Doc. 8745C
TSS-770 and TSS-1070 • 13