To Assemble The Piston - Husqvarna K1270 II Workshop Manual

6.10 To assemble the piston

Lubricate new or cleaned bearings and piston rings with
2-stroke oil before you assemble them.
1. Make sure that the arrow on the piston points in the
direction of the muffler when you assemble the
piston on the connecting rod.
2. Install the needle bearing in the connecting rod.
46 - Repair and servicing
3. Install a snap ring in the piston.
4. Hold the piston in position, push in the wrist pin and
install the other snap ring.
1273 - 001 - 04.11.2019