Servicing Tools Overview - Husqvarna K1270 II Workshop Manual

4.3 Servicing tools overview

1
4
7
Po- Designation
si-
tion
1 Test spark plug
2 Air clearance gauge
3 Flywheel puller
4 Pressure tester
5 Cylinder seal
6 Tachometer
7 Pressure tester
8 Cylinder seal
9 Assembly wedge
12 - Servicing tools
2
5
8
Used for
To do servicing on the ignition unit
To adjust the air clearance between the ignition module and the fly-
wheel.
To disassemble the flywheel.
To examine the crankcase for leaks.
To do a test for crankcase leakages.
To adjust the idle and maximum speed.
To examine the carburetor, fuel lines and check valve.
To do a test for crankcase leakages.
To install the crankshaft sealing ring on the clutch side.
3
6
9
Order No./
Source
502 71 13-01
502 51 34-02
502 51 49-02
531 03 06-23
502 71 39-01
502 71 14-01
501 56 27-01
593 78 62-01
502 50 52-01
1273 - 001 - 04.11.2019