Husqvarna K1270 II Workshop Manual page 18

3. Loosen the center screw. Remove the air filter.
CAUTION: Make sure that dust does not fall
into the carburetor inlet.
5.3.5 To remove the cylinder cover
1. Remove the air filter. Refer to
on page 17 .
2. Remove the 5 screws and the cylinder cover.
18 - Product overview for repair
and servicing
To remove the air filter
5.3.6 To remove the carburetor
1. Remove the cylinder cover. Refer to
cylinder cover on page 18 .
2. Remove the throttle cable end from the throttle lever.
3. Remove the tube to the air purge bulb.
4. Remove the 2 screws for the inlet hose.
To remove the
1273 - 001 - 04.11.2019