4. Push the ignition cable through the air nozzle.
5. Remove the air duct.
5.3.8 To remove the muffler
Before you can remove the muffler, it is necessary to
remove the cutting head and the starter.
1. Remove the cutting arm. Refer to
cutting arm on page 17 .
2. Remove the 3 screws that hold the muffler.
20 - Product overview for repair
and servicing
3. Remove the 2 screws that hold the support plate.
5.3.9 To remove the inlet manifold
1. Remove the carburetor. Refer to
2. Remove the screw to the vibration damping unit.
To remove the
3. Remove the 4 screws and the cylinder.
carburetor on page 18 .
To remove the
1273 - 001 - 04.11.2019