Husqvarna K1270 II Workshop Manual page 17

6. Remove the nut and the rear belt guard.
7. Remove the cutting head.
1273 - 001 - 04.11.2019
5.3.3 To remove the cutting arm
1. Remove the cutting head. Refer to
cutting head on page 16 .
2. Remove the 3 screws and the nut.
5.3.4 To remove the air filter
CAUTION: Be careful when the air filter is
removed. Dust particles must not fall down in
the carburetor inlet. Removal of waste is best
done with a vacuum cleaner.
1. Remove the 3 screws and remove the cover.
2. Clean around the area with a vacuum cleaner.
To remove the
Product overview for repair and
servicing - 17