Example Two; Example Three - Mitel SmarT-1 8380-003-FBCXTX Installation And Programming Manual

13. 9. 2. Example Two

This example sets a Dialer to Call Home on the first day of each month at 2215 hours, using
Route 7. In order to start the modem, the Remote Access Code (Register 606) will have to be
entered (it will act as an MF4 modem wake-up code). When the CONNECT message is
displayed, a valid terminal password can be entered, in order to start the programming session.
• 003 8
• 004 0
• 005 3
• 014 1
• 980 MMDDHHMM
• 681 08001234567 ##
• 685 #80237##
• 608 012215##
• 128 3
• 129 0

13. 9. 3. Example Three

This example sets a Dialer to Call Home daily using the interval timer and using Route 7. In
order to start the modem, the Remote Access Code (Register 606) will have to be entered (it
will act as an MF4 modem wake-up code). When the CONNECT message is displayed, a valid
terminal password can be entered, in order to start the programming session.
• 003 8
• 004 0
• 005 3
• 014 1
• 608 1440 ##
• 681 08001234567 ##
• 685 #80237##
• 608 012215##
• 128 3
• 129 0
8380-383-115-BA
Issue 2, June 1999
Call Home using Route 7 (ACS 685)
No delay before Remote Access Code expected
Thirty seconds of modem tone
Call Home enabled
System Clock
Call Home Number
Route 7 dialing rule
Date and time to Call Home
Dialer will ring for 60 seconds
Lockout is disabled after failure.
Call Home using Route 7 (ACS 685)
No delay before Remote Access Code expected
Thirty seconds of modem tone
Call Home enabled
Interval Timer
Call Home Number
Route 7 dialing rule
Date and time to Call Home
Dialer will ring for 60 seconds
Lockout is disabled after failure.
Call Home
74