Table of Contents
Advertisement
Line and Trunk Options
8. 21. 128 - Wait for Access/Security Code Timer
This register specifies the time in which an access code (programmed in the 606 Register on
page 23) or a security code (programmed in the 603 Register on page 22) must be entered on a
trunk after the Dialer auto-answers. If time-out occurs the trunk will be locked for a period of
time defined by Register 129.
Register
128 T
Refer to Appendix 2 for country-specific-default data.
8. 22. 129 - Security Code Lockout Timer
If a security code is entered incorrectly, the line is locked out by the Dialer. During this period,
the ability for the Dialer to auto-answer is blocked. Lockout expires when the subscriber side
goes off-hook or when the time defined by this register is met.
Register
129 T
Refer to Appendix 2 for country-specific-default data.
8. 23. 130 - Off-hook Recognition Timer
An off-hook is determined by the detection of Exchange loop current by the Dialer with the
specified amount of time.
Register
130 T
Refer to Appendix 2 for country-specific-default data.
45
T = 0 disable
T = 1 for 10 seconds
T = 2 for 20 seconds
T = 3 for 30 seconds
T = 0 disable
T = 1 for 10 seconds
T = 2 for 20 seconds
T = 3 for 30 seconds
T = 0 for 20 ms
T = 1 for 20 ms
T = 2 for 40 ms
T = 3 for 60 ms
Description
T = 4 for 40 seconds
T = 5 for 50 seconds
T = 6 for 60 seconds
T = 7 for 70 seconds
Description
T = 4 for 40 seconds
T = 5 for 50 seconds
T = 6 for 60 seconds
T = 7 for 70 seconds
Description
T = 4 for 80 ms
T = 5 for 100 ms
T = 6 for 120 ms
T = 7 for 140 ms
T = 8 for 80 seconds
T = 9 for 90 second
T =
for 100 seconds
T = # for 110 seconds
T = 8 for 80 seconds
T = 9 for 90 second
T =
for 100 seconds
T = # for 110 seconds
T = 8 for 160 ms
T = 9 for 180 ms
T =
for 200 ms
T = # for 220 ms
8380-383-115-BA
Issue 2, June 1999
Advertisement
Table of Contents
