13. Call Home
13. 1. General
At a given time on either a given day of each month or daily, the SMarT-1 EuroRoute One-line
Dialer will originate a call by using a specific route or by dialling a specific number directly.
After dialling the Call Home Well number, the Dialer will wait for a programmed delay, send
the trunk number as an MF4 digit 1 and wait for a programmed time for the Remote Access
code (Register 606), or it will send modem originate (V.21 channel 1) tone. While originate
tone is being sent and the Dialer does not see modem answer (V.21 channel 2) carrier from the
far end within a programmed time, it will send an MF4 B tone when the timer expires.
If neither the Remote Access code nor the answer carrier is received within the programmed
times, the Dialer will be locked out for the time specified by Register 129 and will then go idle.
Each string entry must be terminated with a "##".
13. 2. 003 - Call Home Route to Use
This register is used to select the route that will be used by the Call Home feature.
Register
T = 0 for direct dial MF4 using number in Register 600
T = 1 for execute Route 0 (615)
T = 2 for execute Route 1 (625)
T = 3 for execute Route 2 (635)
T = 4 for execute Route 3 (645)
003 T
T = 5 for execute Route 4 (655)
T = 6 for execute Route 5 (665)
T = 7 for execute Route 6 (675)
T = 8 for execute Route 7 (685)
T = 9 for direct dial rotary using number in Register 600
Refer to Appendix 2 for country-specific-default data.
8380-383-115-BA
Issue 2, June 1999
CHAPTER 13
Description
Call Home
70