6R2 - Authorisation Number; 6R3 - Dummy Cost Centre Code; 6R4 - User Defined Route String Register - Mitel SmarT-1 8380-003-FBCXTX Installation And Programming Manual

Access Control Sequences

9. 11. 6R2 - Authorisation Number

You can enter an authorisation number that can be output automatically to access a Carrier.
This Register is dialled out by using the "4" ACS token.
Register
Where R is the Route Number 1 (for Route 0) through 8 (for Route 7). This entry may contain up
6R2
to 80 characters maximum.
Refer to Appendix 2 for country-specific-default data.
Note: This register should end with a ##, which indicates that the string is finished.

9. 12. 6R3 - Dummy Cost Centre Code

You can program a Dummy Cost Centre Code that will substitute an Cost Centre Code, if a
complete Cost Centre Code is not dialled by the user (see Register R54/74 on page 76). The
entry can be a maximum of 80 digits. This Register is dialled out by using the "5" ACS token.
Register
Where R is the Route Number 1 (for Route 0) through 8 (for Route 7). This entry may contain up
6R3
to 80 characters maximum.
Refer to Appendix 2 for country-specific-default data.
Note: This register should end with a ##, which indicates that the string is finished.

9. 13. 6R4 - User Defined Route String Register

You can program a number to be dialled out in the ACS. The entry can be a maximum of 80
digits. This Register is dialled out by the "9" ACS token.
Register
Where R is the Route Number 1 (for Route 0) through 8 (for Route 7). This entry may contain up
6R4
to 80 characters maximum.
Refer to Appendix 2 for country-specific-default data.
Note: This register should end with a ##, which indicates that the string is finished.
53
Description
Description
Description
8380-383-115-BA
Issue 2, June 1999