Local Security Code - Mitel SmarT-1 8380-003-FBCXTX Installation And Programming Manual

5. 5. Local Security Code

The contents of the 609 Register will contain the security code for entering programming mode
locally. Upon an off hook condition, the user dialled digits are screened. If the digits dialled by
the user are matched with the contents of this register, modem carrier tone will be presented.
Upon connection, modem programming mode is entered. If the modem fails to connect after
the specified time defined by the 011 Register (see page 36), the Dialer will enter MF4
programming mode. The user may then continue to program with an MF4 instrument.
For further information on local programming, turn to page 26.
Register
609 XX
Note: MITEL recommends entering a unique access code for programming access to the
Dialer.
8380-383-115-BA
Issue 2, June 1999
XX = the digits to be dialled from the FAX side of the Dialer in order to enter
programming mode locally (maximum of 80 digits); (#0 )
Security Access Registers
XX =


24