Table of Contents
Advertisement
8. 18. 124 - Specify Default Route
The Default Route option is used for the following reasons: providing an ACS for the hot line
feature, executing without picking an ACS and executing the specified route after an inter-digit
time out.
Register
124 T
Refer to Appendix 2 for country-specific-default data.
8. 19. 126 - PABX/Centrex Enable/Disable
This option controls whether the user will first dial a PABX/Centrex digit before dialling the
destination number.
Register
126 T
Refer to Appendix 2 for country-specific-default data.
Note: The Dialer enables PABX/Centrex in 126, and programming the PABX/Centrex trunk
Access Code(s) in the PABX/Centrex screening tables 841 through 845. For further
information, refer to page 63.
8. 20. 127 - Time to Auto-answer
The Dialer can automatically answer an incoming call for remote programming purposes.
Register
127 T
Refer to Appendix 2 for country-specific-default data.
8380-383-115-BA
Issue 2, June 1999
T = 0 Route 0 ( 615)
T = 1 Route 1 ( 625)
T = 2 Route 2 ( 635)
T = 3 Route 3 ( 645)
T = 0 for disable
T = 1 for enable
T = 0 for disable
T = 1 for 10 seconds
T = 2 for 20 seconds
T = 3 for 30 seconds
Description
T = 4 Route 4 (655)
T = 5 Route 5 (665)
T = 6 Route 6 (675)
T = 7 Route 7 (685)
Description
Description
T = 4 for 40 seconds
T = 5 for 50 seconds
T = 6 for 60 seconds
T = 7 for 70 seconds
Line and Trunk Options
T = 8 for 80 seconds
T = 9 for 90 seconds
T =
for 100 seconds
T = # for 110 seconds
44
Advertisement
Table of Contents
