EdilKamin PELLKAMIN 12 Installation, Use And Maintenance Manual page 45

MESSAGE PROBLEM
Shutdown due to exceeding
H07
maximum fumes temperature.
Shutdown due to overheating in
H08
the product
Shutdown due to gearmotor
H09
failure.
Shutdown due to exceeding
H10 maximum
temperature
Shutdown
H11
security
Problem in the thermostat. the
H12 product works only in manual
mode
MESSAGES WHICH DO NOT SHUT THE Fireplace DOWN, BUT ARE SIMPLY WARNINGS
LOW REMOTE CONTROL BATTERY LEVEL:
The battery symbol displays on the remote's display if the battery is low.
MAINTENANCE:
A wrench symbol is shown on the display after 2000 hours of operation.
The product is working, but it must be serviced by an authorised Edilkamin technician.
TROUBLESHOOTING
SOLUTION
• Check the type of pellet (contact the technician if in
doubt)
• Contact the technician
• please see H07
• Contact the technician
motherboard • Contact the technician
for pressostat • Check that the fireplace, exhaust duct
• Contact the technician
• Contact the technician
45