DRAWER AND VENTILATION KIT
ASSEMBLY INSTRUCTIONS
1. unscrew the metal cover on the top part of the frame
2. replace the metal cover with the pre-assembled Kit (1), and screw it on the sides
3. electrically connect the fan to the circuit board as shown on the high-voltage terminal board to the side (poles
7,8,9, Line, Earth, Neutral respectively)
4. position the snap fitted grille and ceramic assembly and secure it frontally with the self-tapping screw provided
5. the fan must then be activated by an Edilkamin Assistance Centre, using the reserved settings menu.
1
2
26
VERSION WITH FRONTAL VENTILATION AND DRAWER (3)