Fitting The Inlet Surround - EdilKamin PELLKAMIN 12 Installation, Use And Maintenance Manual

INLET SURROUND
The inlet surround is used to fill the gap remaining
between the fireplace frame and the cladding.
The surround has an opening on one long side. We
recommend installing the surround - which is purely
decorative - with the opening facing upwards.
To mount it (Figure 16 below):
• insert the surround on to its supports
• secure it with the four grub screws included
• for the side versions, fasten it to the bracket with
a nut (D)
INLET SURROUND
For versions
2. with frontal ventilation and pellet loading trapdoor
(see fitting frontal ventilation Kit)
3. with frontal ventilation and pellet loading trapdoor
(see fitting frontal ventilation and drawer Kit)
4. with ducted ventilation and pellet loading drawer
(see fitting Drawer and Ducted Ventilation Kit)
Before installing the surround you have to screw on
one fixing bracket.
fixing bracket
D
29