Forcing The Back-Up; Modifying The Room Temperature Set Point - DeDietrich AWHP-2 MIV-3 User Manual

Fig.8 Accessing the forcing function
Fig.9 Forcing selection
Fig.10 Press the key
Fig.11 Modifying the value
7611973 - v04 - 07032016

6.2.2 Forcing the back-up

Note
It is impossible to force the back-up when the shut-down/frost pro­
tection mode is selected.
It is possible to force use of the back-up to complement the heat pump. To
force use of the back-up, perform the following operations:
1. Press the
M002261-C
2. Hold the
the forcing desired.
Display
+
+
+
The symbol
M002264-D
the display.

6.2.3 Modifying the room temperature set point

1. Press the
M002240-B
2. Use the
Tab.14 Room temperature set point parameter
Temperature
Room temper­
ature set point
3. Press the
Note
M002241-B
When a room thermostat is connected, set it to a value 2 K higher
than the room temperature set point
and keys simultaneously.
key down and press the
+
disappears from
key.
or keys to modify the value.
Adjustment
range
from 15 to 30
°C
key to confirm and exit the menu.
6 Settings
key successively to choose
Back-up
Forcing the back-up for heating
Forcing the back-up for domes­
tic hot water
Forcing the back-up for heating
and domestic hot water
Back-up forcing deactivated
Increment Factory setting
1 °C 20°C
.
AWHP-2 MIV-3 23