Port Led State Indicators - Extreme Networks ExtremeSwitching Virtual Services Platform 4450GTX-HT-PWR+ Installation Manual

Installing the VSP 4450GTX-HT-PWR+
Label Color and Status
Green (blinking)
Off
Status Green (solid)
Green (blinking)
Amber (solid)
Amber (blinking)
Off
RPS Green (solid)
Green (blinking)
Amber (solid)
Amber (blinking)
Off

Port LED state indicators

This section describes the port LED state indicators by color and fluctuation cues.
Note:
Indicator states are applicable to the 4450GTX-HT-PWR+ model of VSP 4000 switches.
The following list describes the three port LEDs:
• Activity indicates the level of activity on the link.
• Link indicates the presence of an Ethernet link.
• Speed indicates the port speed (for example, 10 Mb/s, 100 Mb/s, 1000 Mb/s).
August 2018
Description
System is in reset.
The switch is not receiving power and not operating.
• During start-up: The power-on self-test (POST) is complete
and the switch is operating normally.
• After start-up: The switch is running the agent code
successfully.
The switch is loading the agent software code.
The switch encountered an error when running the diagnostic
software.
The switch is booting and running diagnostic software. Normal
activity during boot process.
The switch failed the power-on self-test (POST) or failed to load
the agent code.
The switch is connected to a redundant power supply unit
(RPS) or a secondary external power supply, and is operating
normally.
The switch is connected to a secondary power supply, but the
power input is disconnected.
The power supply in slot 1 or slot 2 was removed after
operating.
The power supply in slot 1 or slot 2 is present, but not supplying
power to the switch.
No power to secondary power supply. The switch is not
connected to an RPS or secondary power supply. The RPS is
not supplying power, or the DC/DC module is not supplying
power..
Installing the Virtual Services Platform 4450GTX-HT-PWR+ 34