Port Led State Indicators - Extreme Networks ExtremeSwitching Virtual Services Platform 4850GTS Series Installation Manual

Related links
LED state definitions

Port LED state indicators

This section describes the port LED state indicators by color and fluctuation cues.
Note:
Indicator states are applicable to all models of VSP 4000 switches.
The following list describes the three port LEDs:
• Activity indicates the level of activity on the link.
• Link indicates the presence of an Ethernet link.
• Speed indicates the port speed (for example, 10 Mbps, 100 Mbps, 1000 Mbps).
Table 17: RJ45 Port LED state indicators
Label
Speed/PoE+
Link / Activity
Table 18: SFP/SFP+ transceiver Port LED state indicators
Label Color and Status
In Use Green, Blink
Green, Steady
Amber, Blink
August 2018
on page 36
Color and Status
Green, Blink
Green, Steady
Amber, Blink
Amber, Steady
Amber, Green Pulse
Off
Green, Steady
Green, Blink
Green, Slow Blink
Off
Description
Not applicable.
The SFP port and the transmit port are active.
Not applicable.
Installing Virtual Services Platform 4850GTS Series
Description
The port is set to operate at 1000 Mbps with PoE.
The port is set to operate at 1000 Mbps without PoE
+.
The port is set to operate at 100 Mbps with PoE+.
The port is set to operate at 100 Mbps without PoE
+.
The port is experiencing a PoE+ error.
When the Link/Activity LED is green and the Speed
LED is off, the port is set to operate at 10 Mbps for
all models.
The link established but no data activity exists.
The link is established and data activity exists (the
blink rate indicates the level of activity).
The port is administratively disabled.
Local/remote fault.
LED state definitions
Table continues...
39