Table of Contents
Advertisement
Installing the VSP 4450GTX-HT-PWR+
Power cord specifications
To connect AC power to the switch, you need an appropriate AC power cord as described in the
following table, also see the following table for plug specifications.
Table 14: International power cord specifications
Country and Plug Specification
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking on the outside of the cord
jacket to comply with the CENELEC Harmonized
Document HD-21)
United States of America, Canada, and Japan:
• NEMA5-15P male plug
• UL-recognized (UL stamped on cord jacket)
• CSA-certified (CSA label secured to the cord)
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
Australia:
• AS3112-1981 male plug
Danger:
Using power cords with a proper grounding path
Use only power cords that have a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the
switch can result in excessive emissions. For a translation of this statement, see
safety messages
Connect power to the front panel
Connect the AC power cord to the front of the switch, and then connect the cord to an AC power
outlet. The following figure shows how to connect the AC power cord to the switch front panel.
August 2018
on page 39.
Installing the Virtual Services Platform 4450GTX-HT-PWR+
Specifications
• 220 or 230VAC
• 50 Hz
• Single phase
• 100 or 120VAC
• 50–60 Hz
• Single phase
• 240VAC
• 50 Hz
• Single phase
• 240VAC
• 50 Hz
• Single phase
Typical Plug
Translations of
30
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeSwitching Virtual Services Platform 4450GTX-HT-PWR+ and is the answer not in the manual?
Questions and answers