Installing The Virtual Services Platform 4000 On A Table Or Shelf - Extreme Networks ExtremeSwitching Virtual Services Platform 4450GTX-HT-PWR+ Installation Manual

3. Rubber footpads
4. Documentation that includes the following:
a. Locating the latest software and product release notes for Virtual Services Platform
4000 Series
b. Virtual Services Platform 4000 Series Regulatory Guide
c. Virtual Services Platform 4450GTX-HT-PWR+ Quick Install Guide
d. The China RoHS paper
5.
Note:
Power cords must be ordered separately. Ensure you order the correct power code for
your region. For more information, see
Installing the Virtual Services Platform 4000 on a table or
shelf
You can install a single VSP 4000 switch on any flat surface. The surface must support the
combined weight of the switch and attached cables (from 15 and 20 pounds [7 to 9 kilograms]).
To install a VSP 4000 on a table or shelf, perform this procedure.
1. Attach the included rubber footpads on the bottom of the switch at the locations indicated.
2. Set the switch on a table or shelf as illustrated below. Allow at least 2 inches (5.1
centimeters) on each side for proper ventilation and at least 5 inches (12.7 centimeters) at
the back for power cord clearance.
August 2018

Installing the Virtual Services Platform 4000 on a table or shelf

Installing the Virtual Services Platform 4450GTX-HT-PWR+
Power cord types and order codes on page 11.
21