Installing The Virtual Services Platform 4000 On A Table Or Shelf - Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-PWR+ Installation Manual

Installing the VSP 4450GSX-PWR+ series
Installing the Virtual Services Platform 4000 on a table or
shelf
You can install a single VSP 4000 switch on any flat surface. The surface must support the
combined weight of the switch and attached cables (from 15 and 20 pounds [7 to 9 kilograms]).
Note:
A factory-supplied 4450GSX series switch has a USB port but no USB device or cover.
To install a VSP 4000 on a table or shelf, perform the following procedure.
1. Attach the included rubber footpads on the bottom of the switch at the locations indicated.
2. Set the switch on a table or shelf as illustrated below. Allow at least 2 inches (5.1
centimeters) on each side for proper ventilation and at least 5 inches (12.7 centimeters) at
the back for power cord clearance.
August 2018 Installing the Virtual Services Platform 4450GSX-PWR+ 22