Table of Contents
Advertisement
14 Inspection and maintenance
14 Inspection and maintenance
The equipment is subject to pressure!
▶ Risk of severe injury or death.
Depressurize the plant.
●
Completely drain the plant.
●
Use of incorrect spare parts!
▶ Damage to the GEMÜ product.
▶ Manufacturer liability and guarantee will be void.
Use only genuine parts from GEMÜ.
●
Hot plant components!
▶ Risk of burns.
Only work on plant that has cooled
●
down.
Exceptional maintenance work!
▶ Damage to the GEMÜ product.
Any maintenance work and repairs not described in these
●
operating instructions must not be performed without
consulting the manufacturer first.
The operator must carry out regular visual examination of the
GEMÜ products depending on the operating conditions and
the potential danger in order to prevent leakage and damage.
The product also must be disassembled and checked for
wear in the corresponding intervals.
1. Have servicing and maintenance work performed by
trained personnel.
2. Wear appropriate protective gear as specified in plant op-
erator's guidelines.
3. Shut off plant or plant component.
4. Secure plant or plant component against recommission-
ing.
5. Depressurize the plant or plant component.
6. Actuate GEMÜ products which are always in the same po-
sition four times a year.
7. If necessary, the end position counter User can be reset
after maintenance or other changes under parameter
Cycle Counter.
GEMÜ R563 eSyStep
WARNING
CAUTION
CAUTION
NOTICE
14.1 Spare parts
The product can only be repaired at GEMÜ. The replacement
of spare parts may only be carried out by GEMÜ. If this pro-
cedure is not observed, the purchaser's guarantee rights and
the manufacturer's legal liability cease. This can also lead to a
loss of all rights to claim damages.
Replacement of spare parts
▶ Damage to the GEMÜ product.
●
1. Remove the product completely from the plant using ap-
propriate tools.
2. Send the product with return declaration to GEMÜ (see
"Returns", page 51).
14.2 Cleaning the product
•
Clean the product with a damp cloth.
•
Do not clean the product with a high pressure cleaning
device.
48 / 54
CAUTION
Do not dismantle the product but send
it completely to GEMÜ.
www.gemu-group.com
Advertisement
Table of Contents
