Frame
NLGI #2 EP molybdenum disulfide fortified grease is preferred for all sliding contact type applications such as
frame pins. Grease every 8 hours of operation:
(2) Lift Frame Pin Bushings
(2) Top Link Sleeves
Note: Refer to the operator's manual for lubrications instructions related to the snow blower.
Grease Specification
Grease should meet the following recommendations:
"SAE Multi-purpose grease
"SAE Multi-purpose grease containing 3 to 5 per cent molybdenum disulfide
"Below 0° C (32° F) use SAE (NLGI) #0 or #1
"Above 0° C (32° F) use SAE (NLGI) #2
Lubrication Chart
Grease Schedule
Grease should meet the following recommendations:
SAE Multi purpose grease
SAE Multi purpose grease containing 3 to 5 per cent molybdenum disulfide
Below 0° C (32° F) use SAE (NLGI) #0 or #1
Above 0° C (32° F) use SAE (NLGI) #2
FM-115 07/15
© 2015 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-6