Table of Contents
Advertisement
Spectral M800 Q4 IP
To operate the device with a DMX controller:
01) Select DMX mode in the submenu. See 6.6.3. Master/Slave Mode on page 30 for more information.
02) Set the DMX starting address of the device in the DMX Address submenu. See 5.3. DMX Connection
on page 22 and 6.6.4. DMX Address on page 30.
03) Select the DMX channel mode. See 6.6.5. DMX Configuration on page 30 for more information. See
6.7. DMX Channels on page 36 for complete overview of all DMX channels.
Control Panel
●
Use the MENU button to exit the current submenu and to return to the Main Menu
●
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
●
Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected value.
Start-up
Upon start-up the display will show the current software version.
Note:
●
If no button is pressed, after 25 seconds the display will turn off. Press any button to turn the display
on.
●
If the display is locked, enter the password to access the main menu. The default password is
pressing the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN, ENTER. Deactivating the
display lock does not affect the submenu items which by default require a password. See 6.6.7.7.
Settings Lock on page 33 and 6.6.9. Safety Lock on page 35 for more information.
Product code: 43571
A) LED display
B)
MENU button
C) ENTER button
D) UP button
E)
DOWN button
Fig. 15
26
Advertisement
Table of Contents
