Symbols And Signal Words; Symbols On The Information Label - SHOWTEC Spectral M800 Q4 IP User Manual

Hide thumbs Also See for Spectral M800 Q4 IP:
Table of Contents

Advertisement

Spectral M800 Q4 IP
References:
0–255:
Notes:

Symbols and Signal Words

Safety notes and warnings are indicated throughout the user manual by safety signs.
Always follow the instructions provided in this user manual.
DANGER
WARNING
CAUTION
Attention
Important
Electrical hazard
Hot surface
Eye damage hazard
Provides important information about the disposal of this product.

Symbols on the Information Label

This product is provided with an information label. The information label is located on the backside of the
device.
The information label contains the following symbols:
This device shall not be treated as household waste.
This device falls under IEC protection class I.
Replace any cracked protective shield.
Minimum distance from lighted objects.
Caution: Risk of electric shock. Do not open.
Caution: To reduce the risk of electrical shock, do not remove cover. No user-
serviceable parts inside. Refer servicing to qualified personnel.
Product code: 43571
References to chapters and parts of the device are in bold lettering, for example:
"Refer to 2. Safety", "turn the adjustment screw (02)"
Defines a range of values
Note: (in bold lettering) is followed by useful information or tips
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
Indicates important information for the correct operation and use of the
product.
Read and observe the instructions in this document.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectral m800 q4 ip6543571

Table of Contents