Pc Comissioning Software; Device Input Programming - Eaton FX6100 Installation And Operation Manual

PC comissioning software

Device input programming

Fire
Fault
Reset
Silence
Pre-alarm
Evacuate
Fire/extinguisher activate
Fre activate
None fire
Test mode
Isolate zones
Isolate addresses
Non-Latching-> device won't latch in alarm condition, used in conjunction with
isolates .
Day / night
Devices affected :
Optical-Heat -> mode changes between heat or optoheat mode
Heat -> mode changes between Heat A1R and Heat CS
INSTALLATION AND OPERATION MANUAL 25-16329-B December 2019 www.eaton.com
Panel reports fire from device.
Panel reports fault from device.
Panel resets.
Silence all currently active sounders.
Panel reports pre-alarm from device.
Panel will send all alarm
Fire/extinguisher output will operate
Fre operates
Event will be logged but not displayed
(cause and effect will operate)
System in test
Isolate programmes zones
Isolate programme addresses
Section 2: Commissioning
29