Overtightening fasteners can damage the Terreon material. Use caution when tightening bowl and sprayhead fasteners. ® Product warranties may be found in the “Products” section on our Web site at www. bradleycorp.com. 12/11/07 Bradley Corporation • 215-1497 Rev. F; ECN 07-814...
Do not tighten. Secure the bowl to the wall anchors with 3/8” bolts and 1” min. O.D. washers, two places. Do not overtighten. Tighten the pan-head screws Do not overtighten. Bradley Corporation • 215-1497 Rev. F; ECN 07-814 12/11/07...
Page 8
Slide the valve bracket up and lift it from the frame. Using a thread sealer, thread the stop/check valve onto the tempered wall stub-out. 12/11/07 Bradley Corporation • 215-1497 Rev. F; ECN 07-814...
Page 9
Connect the 1/2" flexible assembly. hose from the cold water supply stub-out to the hot water heater inlet. Bradley Corporation • 215-1497 Rev. F; ECN 07-814 12/11/07...
Page 10
• To reinstall sprayhead cover/shelf: Position the cover/shelf on the sprayhead body and secure it to the sprayhead body using the screws provided. Sprayhead INFRARED SENSOR Nut, 1/2"-14 NSPM 269-1608HP Components (110-115) Window (269-1241) Aerator Assembly (S05-180) O-Ring (125-157) 12/11/07 Bradley Corporation • 215-1497 Rev. F; ECN 07-814...
• reconnect to the adjacent valve and turn on the water supplies to the unit; • pass your hand in front of the sensor. If the station still fails to turn on, replace the sensor. Bradley Corporation • 215-1497 Rev. F; ECN 07-814 12/11/07...
2. Remove and clean the strainer. If it needs to be replaced, Contact your Bradley representative to strainer. order Bradley part no. 173-028. 3. Check the piston for smooth movement: A. Remove the valve’s cap and thermostat.
Avoid contact with hot pans and objects. Repair Kits: Terreon ® repair kits are available. Contact your Bradley representative or distributor for part numbers and pricing Repair kits are made to order and have a shelf life of 30 days. ®...
To change soap, pour out all of the soap from the dispenser. Rinse the dispenser with hot water several times until all residue is removed. Pump the valve until clean water appears. Rinse the dispenser with ethyl alcohol; air dry before refilling. 12/11/07 Bradley Corporation • 215-1497 Rev. F; ECN 07-814...
Need help?
Do you have a question about the Express SS Series and is the answer not in the manual?
Questions and answers