Zigbee Network Communication Test; Unicast Test; Unicast Between End-Device And Coordinator In The Form Of Short Address - Ebyte E180-ZG120B User Manual

Efr32 2.4ghz zigbee, soc wireless module

Hide thumbs Also See for E180-ZG120B:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

E180-ZG120B User Manual

Similarly, the routing node and the end-device node also join the ZigBee network according to the appeal method. If

the node type does not need to be added to another ZigBee network, the Enter button

next to the node type

configuration also needs to be clicked. Write the parameters after modifying the network parameters, and finally restart to

join the new ZigBee network

7.3 ZigBee Network communication test

Enter the configuration mode, configure the target network address, and modify the target network address of the coordinator to

the local short address (0xFCFA) of the end-device. The destination network address of the end-device is 0 by default. 0 is the

coordinator's network short address (the coordinator's network short address is always 0). It does not need to be modified at this time.

If the end-device communicates with the non-coordinator node, it needs to be modified (modified to the destination node's network

local short address).

Table of Contents