Ebyte E180-ZG120B User Manual page 30

Efr32 2.4ghz zigbee, soc wireless module

Hide thumbs Also See for E180-ZG120B:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

Modify node type as coordinator, and click the Enter button, the message box prompts "Configure device type

（3）

success". The general ZigBee 3.0 network is established by the coordinator node, so the factory default end-device node

type needs to be changed to the coordinator before establishing the network.

After the node type is successfully written, modify the ZigBee network required for establishing some network

（4）

parameters (you can also use the default value without modifying the parameters). Modify the channel, network PANID

and transmit power. After modifying the parameters, click "Write Network Parameters". ", the message box will prompt

"Write parameters successfully"

E180-ZG120B User Manual

Table of Contents