Ebyte E180-ZG120B User Manual page 33

Chengdu Ebyte Electronic Technology Co.,Ltd.
Modify the node type as sleep-end-device, click the Enter button, the message box prompts "Configure device
（3）
type is successful", modify the network parameters, its PAN ID and transmit channel parameters must be the same as the
network to be joined, click "Write network parameters", The message box prompts "Write parameters successfully."
Click "Module Restart", the message box prompts "Module restart is successful", click "Enter configuration
（ 4 ）
mode", the message box prompts "Enter configuration status is successful, read parameters successfully", confirm
whether the read PAN ID and transmit channel parameters are Modified value before.
Select the fixed-point networking interface and display the network status as "joined network". The sleep-
（ 5 ）
end-device node has joined the network created by the former coordinator.
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-ZG120B User Manual
32