Chengdu Ebyte Electronic Technology Co.,Ltd.
The node type is modified, and the module needs to be restarted to take effect. Click "Module Restart", and the
(5)
message box prompts "Module restart successful".
After the module restarts, the transfer mode is entered by default.
(6)
again, the message box prompts "Enter the configuration status successfully,
that the parameters read out are the previously modified parameters,
successfully.
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co.,Ltd.
click "Enter Configuration Mode"
At this time,
read parameters successfull
indicating that the network parameters are modified
E180-ZG120B User Manual
y". It can be seen
30