Faq; Manufacturer's Note; Certification - tams elektronik LD-G-5 Manual

English

FAQ

§
Parts are getting very hot and/or start to smoke.
!
Disconnect the system from the mains immediately!
Possible cause: one or more connections are soldered incorrectly.
à Check the connections.
Possible cause: The connection of the motor is connected to locomotive
ground. à Disconnect the connection from locomotive ground.
§
The lighting goes on and off when the speed levels are turned up
or the lighting cannot be switched on or off.
Possible cause: The speed mode of the decoder and the digital control
unit do not correspond. Example: The central is set to the mode 28
speed levels, but the decoder to the mode 14 speed levels. à Change
the speed mode at the central and / or at the decoder.
If you cannot find the problem, please return the decoder for repair
(address on the cover page).

Manufacturer's note

According to DIN VDE 0869, the person who brings the circuit into
operation by extension resp. mounting into a housing is the manufacturer of
the product. If he sells the product to another person he is responsible for
passing on all the relevant papers and to give his name and address.

Certification

This product conforms with the EC- directive 89/336/EWG on
electromagnetic radiation and is therefore CE certified.
Page 40
LD-G-5