tams elektronik LD-G-5 Manual page 15

LD-G-5
number of LEDs connected in series to one output depends on the
digital voltage.
You can determine the number of the LEDs that can be connected in
series to one output from the following formula:
(number of LEDs + 2) x 1,5 < digital voltage
Fixing the locomotive decoder
After completing all connections fix the locomotive decoder with double-
sided adhesive tape, for example.
Using a NEM 652 interface connector
Some locomotives already have an NEM 652 interface connector
mounted. Using a convenient connecting plug you save disconnecting
the connections and you do not need to solder at the locomotive.
The list below shows how to connect the contacts of the interface
connector to the connecting points of the locomotive decoder.
Contact Connection
1 Motor connection 1
2 Lighting back (-)
3 Not used or F1
4 Power supply left
5 Motor connection 2
6 Lighting front (-)
7 Common conductor
for all functions (+)
8 Power supply right
Colour of cable
orange
yellow
green
black
grey
white
blue
red
English
Connecting points
X7
X4
X6
X2
X8
X5
X1
X3
Page 35