Control Panel - Riello KV/200 20 ISC Solar Installation And Maintenance Manual

THE MAIN CONTROL PANEL
1
2
1 3
0 4
bar
1 Boiler pressure gauge
Displays the pressure in the central heating circuit.
.
2 Storage cylinder temperature selector (NOT USED)
The temperature of the domestic hot water is preset to 44°C in the factory.
The thermostatic mixer valve has to be adjusted to change this value (see
page 37).
3 Green LED
When lit, shows that a flame is being detected.
4 Two figure digital display
Displays information on boiler status.
5 Red LED
When lit, shows that an error (alarm) condition has been detected.
6 Function selector
0
Off / Reset
{
Winter mode
}
Summer mode
/ Central heating temperature selector
7
Allows you to set the temperature of the central heating water.
8 Storage cylinder temperature gauge
Displays domestic hot water temperature.
2 3 4 5 6

CONTROL PANEL

7 8
60
40 80
20 100
0 120
°C
15
GENERAL