Table of Contents
Advertisement
Manually Windows Update
Before you begin
administrator(ZoomRoomsAdmin Sign-in
Sign in as an
Procedure
Do one of the following:
•
Press the Windows key + X or right-click the
select Device Manager.
Right click the desired device and then select Update driver.
Select the desired way to update.
•
Click the
button , and then go to
Check for updates.
Select the plugin or UVC80/UVC50/UVC30 camera and then complete the installation.
Upgrading the CP960
About this task
There are three ways to update the firmware:
•
Update the firmware manually via web user interface
•
Batch update a group of phones on the Yealink device management platform or Yealink Management
Cloud Service
•
Update the firmware manually Yealink RoomConnect plug-in
Note: For more information on how to update a batch of phones on the Yealink device
management platform or Yealink Device Management Cloud Service, refer to
management platform Administrator Guide
Administrator
For more information on how to upgrade the CP960 on Yealink RoomConnect plug-in, please refer
Yealink RoomConnect
to
Accessing the Web User Interface
•
Update the Firmware Manually via Web User Interface
•
Accessing the Web User Interface
Procedure
1. Swipe down from the top of the screen to enter the device setting screen.
2. Tap Status to obtain the IP address of the phone.
3. Open a web browser on your computer, enter the IP address into the address bar (For example.,
"http://192.168.0.10" or "192.168.0.10").
4. Enter the user name (default: admin) and password (default: admin) in the login page and then click
Login.
Update the Firmware Manually via Web User Interface
> Upgrade & Security > Windows Update, and select
Guide.
Userguide.
).
button to open the Power User Menu and then
Yealink Management Cloud Service for Enterprise
or
| Troubleshooting | 38
Yealink device
Advertisement
Table of Contents
