Installation Of Esi Files; Ethercat Communications Setup - Omron 1S Series Startup Manual

6.3. Installation of ESI Files

Install the ESI file for Servo Driver into Power PMAC IDE.
Precautions for Correct Use
Prepare the ESI file described in this section in advance. Contact your OMRON
representative for information on how to procure the ESI file.
1
From the EtherCAT menu of
Power PMAC IDE, select ESI
Manager.
2
Confirm that Omron
R88D-1SN01L-ECT.xml is
registered in the ESI file list of
ESI Manager.
If it is not yet registered, click
Add File and register Omron
R88D-1SNxxx-ECT.xml.
3
Click Close to close the ESI
Manager page.

6.4. EtherCAT Communications Setup

Set up EtherCAT communications.
17