Terminal Setup - Planet IGS-6325 DIN rail Series Quick Installation Manual

4. Terminal Setup

To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed Switch.
IGS Industrial Managed Switch
Console Port
115200,N,8,1
A terminal program is required to make the software connected to the Industrial
Managed Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
 Baud: 115200
 Parity: None
 Data bits: 8
 Stop bits: 1
 Flow control: None
8
RJ45 to DB9 RS232 Cable
PC/Workstation with
Terminal Emulation Software
Serial Port